CCNP ENWLSD 300-425 Practice Questions & Answers • ExamPrepare

46 questions in this view

Page 1 of 8

Question 1

An engineer is designing a new wireless network for an international company. The design must have these requirements:

• broadcast wireless channels based on country regulations

• controllers to support APs for regulatory domains

• RF changes applied on APs per country that are installed

• multiple-country feature to be used on the controllers

Which design approach must be taken?

Create an RF profile with controllers configured with the same set of countries in the same order.
Create an RF profile with controllers configured with the same set of countries in the random order.
Install APs and controllers with the same part number across all offices globally.
Install APs and controllers with the same license number across all offices globally.

Select an answer above, then submit your vote. Reading or practicing does not cast a vote.

Question 2

A rapidly expanding company has tasked their network engineer with wirelessly connecting a new cubicle area with Cisco WBG until the wired network is complete. Each of 42 new users have a computer and VoIP phone. How many APs for workgroup bridging must be ordered to keep cost at a minimum while connecting all devices?

Select an answer above, then submit your vote. Reading or practicing does not cast a vote.

Question 3

An engineer must perform a predictive design for a wireless network for location readiness and to mitigate interference. Which power level does the engineer use?

10 mw
18 mw
20 mw
50 mw

Select an answer above, then submit your vote. Reading or practicing does not cast a vote.

Question 4

A customer has this wireless design at its main branch:

• two Cisco Catalyst 9800 Series wireless controllers named WLC-A and WLC-B in an N+1 configuration

• the same WLANs with different Layer 3 interfaces for each WLC

• 100 APs in local mode

WLC-A manages the APs for a building named Building A. WLC-B manages the APs for a building named Building B. The customer wants to ensure that users can remain connected and retain their session state, including the IP address, when they move between buildings. How must this requirement be incorporated into the design?

Connect WLC-A and WLC-B by using the redundancy port to sync client sessions.
Implement AP groups for each building by using the same name on WLC-A and WLC-B.
Configure WLC-A and WLC-B in a high-availability cluster and set a mobility MAC address.
Create a mobility tunnel between WLC-A and WLC-B with the same group name.

Select an answer above, then submit your vote. Reading or practicing does not cast a vote.

Question 5

An engineer is designing a wireless network for a manufacturing facility that has high steel shelves. Which antenna type must be used?

indoor omnidirectional
dipole
patch
outdoor omnidirectional

Select an answer above, then submit your vote. Reading or practicing does not cast a vote.

Question 6

A hospital has a Cisco Catalyst 9800 Series Wireless Controller in a SSO solution deployed to the primary data center. The hospital plans to increase redundancy in the wireless environment. Management decides to deploy an extra Catalyst 9800 WLC offsite to another data center on a different subnet. A WAN link connects the data centers with a firewall at both ends. Which two design approaches must the engineer take to ensure that the APs can fail over? (Choose two.)

Create a static RF group leader on one of the wireless controllers.
Create a Site Tags that will include all the APs across the wireless controllers.
Open HTTPS port 443 between the wireless controllers.
Create a mobility group with the same names on both wireless controllers.
Open UDP ports 16666 and 16667 between the wireless controllers.

Select an answer above, then submit your vote. Reading or practicing does not cast a vote.