Enterprise Routing and Switching, Professional
Read questions, check verified answers and discuss the reasoning. Use reading options to shape your revision, or switch to the simulator for timed practice.
46 questions in this view
Exhibit diagram was not captured in this snapshot. In the real exam, click the Exhibit button to view the topology or diagram.
Which two statements about the configuration shown in the exhibit are correct? (Choose two.)
Select an answer above, then submit your vote. Reading or practicing does not cast a vote.
admin@switch> show poe interface
Interface Admin Oper Pair/Mode Max Priority Power Class
status status status power consumption
ge-0/0/0 Enabled ON 2P/AT 19.5W(L) Low 10.6W 4
ge-0/0/1 Enabled OFF 2P/AT 15.4W Low 0.0W not-applicable
...
You are deploying a new campus switching environment using various EX Series switch models. The devices attached to one of the new EX Series switches include IP phones, IoT devices, and wireless access points (APs) requiring power over Ethernet (PoE) with varying power requirements. A sample output from one of these switches is shown in the exhibit.
In this scenario, which two statements are correct? (Choose two.)
Select an answer above, then submit your vote. Reading or practicing does not cast a vote.
Select an answer above, then submit your vote. Reading or practicing does not cast a vote.
user@switch> show configuration poe
guard-band 10;
interface ge-0/0/1 {
priority high;
maximum-power 14;
}
interface ge-0/0/2 {
priority low;
maximum-power 12;
}
user@switch> show poe interface ge-0/0/2
PoE interface status:
PoE interface : ge-0/0/2
Administrative status : Enabled
Operational status : ON
Power limit on the interface : 12.0W
Priority : Low
Power consumed : 12.0W
Class of power device : 0
PoE Mode : 802.3af
user@switch> show poe controller
Controller Maximum Power Guard Management Status Lldp
index power consumption band Priority
0 130.00W 22.20W 10W Static AF_ENHANCE Disabled
After connecting a new Class 4 PoE device to your EX Series switch on port ge-0/0/2, users report that the device will not power on.
Referring to the exhibit, how would you solve this problem?
Select an answer above, then submit your vote. Reading or practicing does not cast a vote.
[edit]
user@router# show interfaces ge-0/0/0
unit 0 {
family inet {
address 10.1.21.1/24;
}
}
[edit]
user@router# show protocols ospf3
realm ipv4-unicast {
area 0.0.0.0 {
interface ge-0/0/0.0;
}
}
area 0.0.0.0 {
interface ge-0/0/0.0;
}
You are asked to implement IPv4 routing using OSPFv3 but the OSPFv3 adjacency is not established.
Referring to the exhibit, which configuration statement is needed to establish OSPFv3 adjacency?
Select an answer above, then submit your vote. Reading or practicing does not cast a vote.
[edit protocols pim]
user@router# show
rp {
local {
family inet {
address 192.168.1.16;
}
}
}
interface all {
mode sparse;
}
Which statement about the configuration shown in the exhibit is correct?
Select an answer above, then submit your vote. Reading or practicing does not cast a vote.